Overview

A tough floor wax that offers durable protection with a beautiful natural finish. The Diamond Hard formulation offers the protection of a varnish with a softer sheen and look. It's easy to apply to your wooden floors with no need to buff and dry in only 30 minutes. It also has a low odour so there will be no lingering wax smells in your home. Available in two finishes of Natural and Natural Oak.

• Beautiful natural finish
• Diamond Hard formulation
• Quick drying
• Low odour

Preparation

Always ensure the surface to be waxed is clean and free from any dust, dirt and grease that may affect adhesion.

• Sand the floor with a 120 grit sandpaper. If you’re preparing a floor that was previously painted, use the floor sander to remove all the previous coating.
• Vacuum any dust and wipe the floor with white spirit.

Application

We recommend performing a test to ensure compatibility with the surface to be waxed, always follow the manufacturer's instructions found on the tin.

• Stir the wax well and apply in the direction of the wood grain.
• Paint three or four floorboards at a time to avoid overlap marks.
• Allow to dry for two hours before applying a second coat, for best results apply 3 coats.
• Before applying the final coat, lightly sand the floor to help the wax stick.
• The floor can be walked on after 8 hours and completely dry in 24 hours. Furniture can be replaced after 24 hours.

Aftercare & Storage

Cleaning

General cleaning will keep your floor in good condition, vacuum and sweep up any dirt that may cause scratches and use a damp microfiber cloth to clean up spillages.

Repair

If the floor does get damaged it's easy to repair, simply repeat the waxing process.