Overview
Add colour to your exterior doors and windows with Ronseal's 10 Year Weatherproof Wood Paint. Available in 14 different shades it offers rich colour and 10 years of weather protection. The easy to apply formulation means there is no need to prime so it is quick to apply and rainproof in only 1 hour. The flexible finish will resist cracking and peeling to leave a smooth finish that looks good year after year.
- Last up to 10 years
- No need for a primer or basecoat
- Resists cracking and flaking
- Rainproof in 1 hour
Please note: On bare wood knots will need to be stopped with a knot blocker.
| Area | Exterior |
| Recommended Use | All smooth sawn outdoor wood apart from decking |
| Base | Water Based |
| Coverage | Up to 12m² per litre |
| Drying Time | Touch dry in 1 hour |
| Re-Coat Time | 4 hours |
| Recommended Coats | 2-3 coats |
| Application Method | Brush |
| VOC Levels | Low |
| Clean Up | Remove as much product as possible and clean with warm soapy water |
Preparation
Always ensure the surface to be painted is clean and free from dirt, dust and grease.
Bare Wood
- Lightly sand the window or door to even out imperfections and leave a smooth surface.
- Remove any dust and wipe the surface down by dampening a cloth with white spirit.
- If there are any holes or cracks fill them with a wood filler such as or .
- Block any knots with a knot blocker.
Previously Painted Wood
- For surfaces which are sound, lightly sand with a 240 grit sandpaper. If the surface is flaking use a 120 grit sandpaper and take it back to the barewood.
- Let the dust settle and wipe it away with white spirit and a cloth.
- If there are any holes or cracks fill them with a wood filler such as or .
- Any rotten wood must be treated with prior to filling.
- Block any knots with a knot blocker.
Application
We recommend performing a test to ensure compatibility, always follow the manufacturer's instructions found on the tin.
- Stir the tin well to make sure the colour pigment has been throughy mixed and all lumps and bumps are gone.
- Apply using a synthetic brush working in the direction of the wood grain.
- Allow the first coat to dry for four hours before apply another coat.
- Once the second coat is dry if you can still see the grain apply a third coat as above.
Aftercare & Storage
Cleaning
Regulary clean your windows and doors to remove dirt and grime and keep them in better condition for longer.
Maintenance
If you notice any spots of damage, sand down the section until smooth and add a coat or two until repaired.
