Overview
A general-purpose wood filler that can be painted, stained, or varnished in as little as 2 hours. Ideal for use on both interior and exterior products for filling dents, scratches and screw holes or gaps on doors, window frames, furniture, and skirting. The quick-drying formulation gives a touch and durable fill that flexes with the natural movement of wood and will not crack or shrink. Once dry this filler can be sanded, nailed, or screwed.
- Water resistant
- Can be painted, stained, or varnished
- Can be sanded, nailed, or screwed
- Fills up to 100mm deep gaps in one application
Not suitable for filling gaps in floorboards.
| Area | Interior & Exterior |
| Recommended Use | Filling dents, scratches, cracks, screw or nail holes, and gaps on doors, window frames, skirting boards, furniture, and other wooden surfaces |
| Drying Time | 2 hours |
| Recommended Coats | As required |
| VOC Levels | Low |
Preparation
Ensure the surface to be filled is free of loose material and dirt.
Application
Always follow the manufacturer's instructions found on the packaging. Test on a small area of the surface to ensure compatibility.
- Place the cartridge into the skeleton gun and slowly squeeze the trigger as you move along the length of the repair.
- Tube - Cut open the nozzle and squeeze directly onto the surface.
- Tub - Use a filling knife to apply the filler to the surface.
- Work well into the gap using an appropriate tool such as a filling knife.
- Leave the filler slightly proud for sanding once dry.
- For deeper damages, build up in layers of 10mm letting it dry between layers.
- Once dry sand the filler so it is even with the surface and dust off.
- Allow to dry for 2 hours before finishing with paint, stain, or varnish.
For best results use a colour filler closest to the surface you are filling.
