Overview

Osmo Uviwax UV Protection is a wax-like satin finish ideal for use on interior panelling, cabinets and doors. It guards the wood against harmful UV radiation. The natural yellowing of wood is greatly reduced, and the natural, lightly coloured wood tone is preserved for a longer time. Osmo's Uviwax gives you a surface that is stain-resistant, water repellent and abrasion-resistant and won't peel, crack, flake or blister.

• UV-resistant and non-yellowing
• water and dirt resistant
• Does not crack, peel or flake
• Easy maintenance

Preparation

Ensure the surface is clear from debris, dry and frost-free

• Clean old microporous stains thoroughly.
• Old paints and lacquers must be completely removed by sanding or using a paint stripper such as .
• Degrease very resinous woods (e.g. Larch) with .

Application

Before applying the product test a small area on the surface to be treated to ensure you are happy with the finished results. Results are influenced by the condition of the wood therefore a trial application is highly recommended.

• Stir the product thoroughly.
• Apply using a brush we recommend using .
• Apply thinly, quickly and evenly along the wood grain and spread well.
• Allow to dry for 3-4 hours under good ventilation.
• If necessary, sand surface with fine sandpaper (grit P360) before applying the second coat.

Note: Always follow the manufacturer's instructions found on the bottle.

Aftercare & Storage

Cleaning

Dust mopping. Damp mopping using , do not over saturate. Using general or multi-purpose cleaners will increase the frequency of maintenance and recoating.

Maintenance

Intensive cleaning and refreshing using or .

Recoating

Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.