Overview

Osmo Polyx Hard Wax Oil is a nearly invisible wood finish ideal for use on interior wooden floors and furniture. One of Osmo most popular products the original hard wax oil is stain resistant, water repellent and abrasion-resistant. The use of natural oils and waxes protects your interior wood without cracking, peeling or flaking whilst allowing the light character of the wood to remain. Along with the easy application and no need for primer this really is the go-to product for wooden floors and furniture.

• Light coloured wood stays light coloured
• Nearly invisible appearance, no ‘permanent wet effect
• Does not crack, peel or flake
• Resistant to household spillages e.g. juice, tea and wine
• Enhances the wood’s natural character

Looking to colour your interior wood why not try Osmo Polyx Oil with tint

Preparation

Always ensure the surface is clean and free form grease, dirt, and frost.

• Clean old microporous stains (wood oils).
• Old paints and lacquers must be completely removed this can be done by sanding back or using a suitable chemical stripper.
• Sand the surface carefully, starting with a coarse sandpaper and finish fine grade. For flooring 120-150 and for furniture 180-240.
• Before application ensure all dust has been removed.

Note: Polyx-Oil Effect Raw is slightly white tinted and protects lighter coloured wood species nearly invisibly. On dark/reddish wood species, Polyx-Oil Effect Raw is visible as slightly white chalky surface.

Application

Always test a small area of the surface to be treated before application to ensure you are happy with the finished look.

• Stir well before use.
• Osmo Polyx Oil is ready to use and does not require thinning.
• Use a , floor brush or microfibre roller.
• Apply thinly working in the direction of the wood grain and spread well.
• Applying excess product may lead to a white chalky surface.
• Allow to dry for 24 hours under good ventilation.
• After drying quickly apply a second coat, thinly.
• If re-coating one coat should be sufficient.

Note: Always follow the manufacturer's instructions found on the tin.

Aftercare & Storage

Cleaning

Clean the surface regularly with a duster or vacuum, for spillages and a more intensive clean use with a damp mop. Avoid over saturating the surface with water. For furniture use the .

Maintenance

For cleaning stains and stubborn scuff marks on the satin finish use .

When signs of wear become visible on the surface re-apply one coat of Osmo Polyx Oil to a cleaned and dried surface.